Everlasting 701 - Fan Speed; Start Defrost

38
SEASONING
-Press for 5 seconds to go to the next phase
-Modify the value with
-Confirm with
-Repeat the same actions for all the 6 phases
-Press to go back to the Rest menu
DAYS:
Days of activation of the rest cycle for each phase.
-Modify the value with
-Confirm with
Days 01: 3d
Current 2d
The display shows the days of activation of the rest cycle for phase 01 (2d)
and the value to be modified (3d)
-Press
for 5 seconds to go to the next phase.
-Modify values with
-Confirm with
-Repeat the same actions for all the 6 phases
-Press to go back to the Rest menu.
NOTE: To avoid an excessive surface drying of the gut, it is necessary set a rest cycle during the drying phase. An excessive drying
of the gut avoids the absorption of inner humidity. The length of the rest cycle depends on how fast the gut becomes wet after the first
manual rest cycle. The gut needs to remain always elastic, soft, and never dry and rough.
p Fan Speed 06
(Parameter not activated)
p Defrost 07
The defrosting cycle is automatically set. If it is necessary to activate it manually, follow the instructions below:
-Press ,
-Scroll the main menu with until you find the Menu 07 Defrosting.
-Confirm with ,
Start Defrost?
No Yes
-Press to activate the defrosting, the unit will go into defrost as needed
-Press
to go back to the main menu
p Programs 08
Selection of the program to be executed.
-Press
,
-Scroll the main menu with until you find the Menu 08 Program.
-Confirm with