57
SERVICE 05 RESET MEMORY
It allows to delete all the saved parameters.
Press ENTER to delete all the saved data.
Reset Memory?
No Ok
► Press ENTER to exit without making any change.
► Press UP to delete all data.
Go back to Service Menu pressing MENU
.
SERVICE 06 RESTORE
To RESET the original paramenters.
WARNING: The deletion of the original parameters causes a reset of the control unit.
The cabinet is blocked, factory parameters are needed.
Press ENTER , to reset the original parametrs
Restore?
No Ok
Press ENTER
yo exit without making any reset.
Press UP to reset the original parameters.
Go back to Service Menu pressing MENU .
To Next Page
Loading...
