EverSewn Sparrow X - Error Messages

66
Machine Introduction
** Please refer to instruction manual in DVD for detailed information.
Screen In general Embroidery mode Page
Upper thread error
The upper thread is broken or
running out soon. Please change
and re-threading the upper thread.
Please refer to "Threading the
upper thread" chapter for more
information.
- 11-13
Lower thread error
The lower thread is broken or
almost running out, please change
and rell the lower thread. Please
refer to "Winding the bobbin" and
"Inserting the bobbin" chapters for
more information.
- 8-10
-
The presser foot is not raised
Please raise the presser foot, and
then press the auto-lock button to
resume. Please refer to "Starting
the connection" chapter for more
information.
41
-
Embroidery hoop is not
removed
Please remove the embroidery
hoop and then press the auto-lock
button to resume. Please refer to
"Starting the connection" chapter
for more information.
41
-
Straight stitch plate is not
installed
Please replace the straight stitch
plate and then press the auto-lock
button to resume. Please refer
to "Replacing the needle plate"
chapter for more information.
41
Motor overload protection
The motor is overloaded due to the
jammed threads or the fabrics are
too thick to be penetrated.
- **
Error messages
6