EVGA X299 Micro User Manual

EVGA X299 Micro (131-SX-E295)
- 24 -
Installing the CPU
Note: Use extreme caution when working with the CPU to not damage any pins in the CPU
socket on the motherboard!
Note: After removing the CPU socket cover, it is
recommended to store it in case you ever need to
transport your motherboard. If you ever remove
the CPU, it is highly recommended to reinstall the
socket cover.
Use the following procedure to install the CPU onto
the motherboard:
1. Remove the plastic protective socket cover by
pulling it straight up. Be sure not to damage
any of the pins inside the socket.
2. Unhook the left socket lever by pushing down
and away from the socket.
3. Unhook the right socket lever, this will release
the load plate
4. Pull the socket lever back and the load plate
will lift.
5. Open the load plate and make sure not to
damage any of the pins inside the socket.

EVGA X299 Micro Specifications

General

Brand	EVGA
Model	X299 Micro
Category	Motherboard
Language	English