Evinrude 30 HORSEPOWER MFE User Manual

CALIFORNIA PROPOSITION 65 WARNING
WARNING. This product can expose you to chemicals
including gasoline engine exhaust, which is known to the State
of California to cause cancer, and carbon monoxide, which is
known to the State of California to cause birth defects or other
reproductive harm.
For more information go to www.p65warnings.ca.gov
Operator’s Guide
30 HORSEPOWER MFE
Original instructions
*216972*
Revision A

Evinrude 30 HORSEPOWER MFE Specifications

General

Horsepower	30 HP
Cylinders	2
Engine Type	2-Stroke
Full Throttle RPM Range	4500-5500 RPM
Fuel Induction System	Carbureted
Starting System	Electric
Fuel Type	Gasoline
Oil Type	TC-W3
Steering	Tiller
Shaft Length	20 in (508 mm)

Summary

About This Guide

Guide Purpose and Safety Signals

Explains the guide's purpose, signal words, and safety symbol.

Important Safety Messages

General Boating and Operational Safety

Fundamental safety rules for boating and operation.

Product Information and Specifications

Owner Identification and Technical Support

Details on identifying the outboard and accessing technical support.

Using The Evinrude MFE Outboard

Component Identification and Labels

Explains labels, component identification, and tiller arm details.

Fuel and Oil

Fuel Requirements and System Operation

Specifies fuels, system operation, fueling, oil, and priming procedures.

Operation

Starting, Stopping, and Control Procedures

Procedures for starting, stopping, shifting, controlling speed, and using safety features.

Tilting and Trim

Tilting, Trim Angle, and Shallow Water Drive

Procedures for tilting, adjusting trim angle, and using shallow water drive.

Engine Monitoring and Warnings

Warning Systems and Diagnostic LEDs

Explains warning systems, oil/overheat warnings, and diagnostic LEDs.

Special Operating Conditions

Operating in Various Conditions

Guidelines for cold weather, salt water, high altitude, shallow water, towing, and weedy conditions.

Engine De-Water and Submersion

Transporting and Storage

Trailering, Storage, and Winterization

Procedures for trailering, storing, winterizing, and pre-season checks.

Pre-Ride Inspection

Aquatic Invasive Species (AIS) Prevention

Maintenance and Service

Maintenance Schedule and Service Procedures

Emissions info, maintenance schedule, and service tasks like anodes, de-carboning, flushing.

Troubleshooting

Product Information and Installation

Outboard Installation and Adjustments

Outboard installation, transom height, and adjustments like steering friction.

Propeller and Specifications

Propeller Selection, Installation, and Specs

Guidance on propeller selection, installation, and technical specifications.

Product Warranty Information

Warranty Coverage, Service, and Owner Responsibilities

Details warranty coverage, exclusions, service, transfer, and owner responsibilities.

Owner Information Updates