Need help?Do you have a question about the Evinrude E-Tec 65 HP and is the answer not in the manual?
General| Horsepower | 65 HP |
|---|---|
| Starting System | Electric |
| Cylinders | 3 |
| Gear Ratio | 2.00:1 |
| Fuel System | Direct Fuel Injection (DFI) |
| Fuel Induction System | Direct Fuel Injection (DFI) |
| Shaft Length | 20 in. (508 mm) |
| Exhaust | Through propeller |
| Weight | 126 kg (278 lbs) |
Important safety guidelines and warnings for service procedures.
Using Evinrude Diagnostics software for troubleshooting and adjustments.
Methods for checking engine operating temperatures using software or pyrometer.
Procedure for testing engine cylinder compression to diagnose powerhead issues.
Systematic procedures for disassembling the powerhead and removing components.
Detailed steps for assembling the powerhead, including crankshaft and piston installation.
Step-by-step guide for disassembling the gearcase, including inspections.
Detailed steps for assembling the gearcase components after service.
Guidelines for diagnosing common trim/tilt unit problems.
Procedures for disassembling the recoil starter, including spring and pulley removal.
Information on safe boating practices and user responsibility for product safety.
Safety precautions for outboard fuel, electrical systems, and minimizing fire hazards.
Safety precautions for handling gasoline, including storage and refueling.
To Next Page
