Need help?Do you have a question about the Evinrude E-Tec 50 HP and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Horsepower | 50 HP |
| Cylinders | 3 |
| Starting | Electric |
| Steering | Remote |
| Trim Method | Power Trim and Tilt |
| Shaft Length | 20 in. (508 mm) |
| Gear Ratio | 2.00:1 |
| Oil Injection | Yes |
| Displacement | 863 cc |
| Fuel Induction | Direct Fuel Injection (DFI) |
Essential safety guidelines for operating and servicing the outboard.
Schedule for regular checks and maintenance to prolong outboard life.
Inspection of cooling system components for corrosion, leaks, and restrictions.
Detailed list of processes and functions controlled by the EMM.
Using Evinrude Diagnostics software for troubleshooting and adjustments.
Performing dynamic tests to isolate faulty cylinders or components.
Tests for ignition system circuits, including coils, capacitors, and sensors.
Tests to verify the fuel pump, injectors, and fuel system pressure.
Description and function of key fuel system components like pumps, filters, and injectors.
Tests for fuel system pressure, injectors, pumps, and vapor separator.
Adjusting the oil injection rate based on engine use and oil type.
Tests for oil injection pump voltage, resistance, function, and fittings flow.
General safety principles for boat owners and operators.
Safety precautions related to fuel, electrical systems, and preventing fire/explosion.
Precautions for storing and handling gasoline safely to prevent fire and explosion.
Troubleshooting guide for an outboard that does not start or turn over.
Troubleshooting guide for an outboard that will not shut off.
To Next Page
