13
Engine Data
The information collected by the network communi-
cates real time data to the
I-Command
tachometer.
This information is displayed on the Engine Data LCD
screen. The default engine data is displayed on the
Engine Data screen of the Main Menu.
Changing default engine data display — To change
the default engine data display, scroll to the Engine
Data screen. Press ENTER. The Engine Data bar at
the top of the screen appears in reverse color. Using
the UP / DOWN buttons, view the data. Press and
hold ENTER for three seconds to set a specific engine
data screen as the default data to be displayed on the
Main Menu.
After scrolling through the entire list, an exit screen will
display. Press ENTER to return to the Main Menu.
The available Engine Data sub-screens are:
• RPM
• Engine Coolant Temperature
• Water Pressure
• Total Engine Hours
• Fuel Consumption Rate
• Oil Tank Level
• Barometric Pressure
• Exit or Return
¾
RPM
RPM is engine revolutions per minute.
¾
Engine Coolant Temperature
The coolant temperature is the temperature of the water circulating through
the engine.
Engine Data Menu
To Next Page
Loading...
Need help?
General