EVIQO EVIPOWER - Page 18

To decrease the default Max Output Load of EVIQO Smart EV Charger to 32 Amps -
choose “1” on the Amperage Dip Switch. For 16 Amps - choose “0”, respectively.
Follow all applicable codes and ordinances and pull a permit for completing the electrical
work as required. Please consult with the licensed electrician in case you have any
questions.
CAUTION: EVIQO Smart EV Charger is a continuous load device,
requiring the dedicated circuit to be rated at 125% of the maximum
load for proper operation and safety.
Dedicated
Circuit Rating
Max Output
Load for
EVIQO Smart
EV Charger
Corresponding Value of Max
Output Load on the
Amperage Dial Switch of the
device
Plug-In
Hardwire
60 A
48 A
3
No
Yes
50 A
40 A
2
Yes
Yes
40 A
32 A
1
Yes
Yes
30 A
24 A
No
Yes
20 A
16 A
0
No
Yes
CAUTION: In Canada, a plug-in installation is permitted exclusively with
a 50 Amps dedicated circuit, according to the regulatory requirements.
eviqo.io 18