01-2018 5035 01 53
maiNtENaNcE
programmiNg
automatic wasHEs/ riNsEs
The appliance’s automatic wash and/or
rinse cycle programmes can be enabled/
disabled.
Programme the type of wash and/or rinse
to be performed on the day and time that
has been set.
It is possible to add and remove automatic
wash/ rinse cycles.
hot water. Do not place your hands in
of burns.
During the washes and rinses, a message
appears showing the progress of the opera-
tion.
NExt maiNtENaNcE
Enable and set the number of days and/or
the number of dispenses.
When one of the values that has set is
reached, the appliance will display a “per-
form maintenance” message.
maiNtENaNcE NotificatioN
Reset the counter which manages the
maintenance alerts.
In order to correctly manage the
has been carried out.
wasH mEssagEs
Set the intervals (number of hours and/or
selections) for each type of wash/ rinse.
When the set values have been reached,
the appliance will display a wash/ rinse
message.
Each wash/ rinse can be made compulsory:
the appliance or some functional units will
not work until a wash/ rinse has been per-
formed.
NExt wasHEs
Displays when the next wash/ rinse will be
required for each type of wash/ rinse.
gENEral sEttiNgs
taNk
The appliance can be supplied by mains
(OFF) or a tank (ON).
ENabliNg tHE DispENsiNg complEtE sig-
Nal
Enables/ disables a beep when the appli-
ance has nished dispensing.
ENabliNg tHE paymENt systEm
Enables/ disables the appliance's payment
system.
Enable the payment system to activate all
its features (price settings, etc.).
accEssiNg tHE mENus witH tHE Door
closED
Enables/ disables access to the program-
ming menus with the door closed.
powEr supply
Allows the type of electric connection or
voltage supply used for powering the appli-
ance to be set.
The setting allows all the electrical
components to be correctly managed
and optimises the appliance's operat-
ing cycles.
To Next Page
Loading...
