66 01-2018 5035 01
filliNg aND EmptyiNg tHE boilEr
The boiler can be lled and emptied.
The hydraulic circuit is automatically lled.
If work is performed on the hydraulic circuit
or if signicant water pockets start forming,
manually ll the hydraulic circuit.
The boiler emptying function opens a sole-
noid valve to allow air to enter the boiler.
filliNg tHE boilEr
The boiler is automatically lled when the
appliance is installed.
Use this function to ll the boiler after
maintenance work has been performed on
the hydraulic system or if signicant water
pockets form.
EmptyiNg tHE boilEr
The boiler must be emptied by techni-
cal personnel.
The boiler water is very hot and can
cause burns.
Before emptying the boiler, wait for
the water in the boiler to cool down.
The appliance has a procedure for "quickly
cooling" the boiler.
The emptying function opens a solenoid
valve to allow air to enter the boiler.
macHiNE paramEtEr tEsts
Sets the activation time of the components
during the self-test.
rEstorE factory sEttiNgs
Allows the appliance to be restored to its
factory settings.
All the statistical data, fault lists and
settings will be lost.
timE aND DatE sEttiNgs
The time and date are used to record
events (for example faults, etc.), manage
programmed washes and produce mainte-
nance warnings.
Set the current date and time.
laNguagE
The predened language used to display
messages on the user interface and in the
menus can be changed.
Some languages are available for the
“change language” function.
usEr profilEs
Some programming functions can be ena-
bled/ disabled via the access proles.
The access prole ensures that only the
functions linked to it can be used.
Each user prole has an access password.
The default passwords are:
-Technician (4444)
-Distributor (3333)
-Loader (2222)
-User (1111)
Advanced programming functions must
only be used by people with specific
This function can be used to change the
access password for each user profile; tap
the keypad icon to change the password.
To Next Page
Loading...
