EVOLIGHTS SPARK PRO
Instrukcja obsługi / User Manual
40
Consumable feed port & storage bin
(Filling & refilling procedures)
• Open the magnetic hinged lid.
• Fill the consumable into the feed port, NOT into the output
nozzle when power off.
• Close the lid securely after filling.
• The capacity of storage bin is 200 g.
• Only use Evolights consumable.
8.2.1. Step of cleaning powder stuck
When the machine is stucked, you can follow the prompts on the front of the machine to clean up the
powder stuck.
Step of cleaning powder stuck
When the machine is stucked, please use the manual rotation port for stucking and rotate it in the di-
rection shown in the figure to clear the powder stuck.
8.2.2. Precaution for use
• The Spark Seed could be only filled in and used for the Spark Machine after successfully identified
by swiping Consumable ID card.
• Make sure to fill the Spark Seed through the feed port on the top of the fixture and when power
supply is off.
• Use Dry Chemical Extinguishers once lighting a fire. DO NOT use Water-Type Extinguishers, Foam
Extinguishers or Carbon Dioxide Extinguisher
To Next Page
Loading...
