EVOLIGHTS SPARK PRO
Instrukcja obsługi / User Manual
39
8. Spark seed
Spark Seed is the consumable specially designed for Spark PRO Machine, to create light golden color
cold firework for stage effect.
8.1 ldentify & activate spark seed
Swipe the Consumable ID card that come with the Spark Seed to identify the consumables about to be
filled into the fixture.
When the LCD on the fixture shows the information of the Spark Seed after successfully swiping card,
the identified Spark Seed could be filled into the fixture.
Please properly keep the Spark Seed ID Card and corresponding Spark Seed before swiping, and
properly dispose of the invalid card after swiping and identifying.
Every Spark Seed ID Card, which is attached to the Spark Seed pouch, stores
corresponding run-time information. The run-time for 200 g pouch card is 25 minutes.
Every 200 g Spark Seed could output 12-15 minutes Spark at highest output level
(Spark height level 10).
When swiping multiple cards at one time, or swipe a new card before the machine runs
out of run-time, the run-time will be cumulative.
8.2. Fillin spark seed
Tear open the vacuum resealable foil pouch, and fill in the Spark Seed through the feed port on the top
of the fixture depending on the dosage needed.
To Next Page
Loading...
