2. Remove the cards
that are in the
feeder.
3. Insert the cleaning
card in the feeder
as indicated.
5. Put the feeder
back into the
printer than
press on the top
part of the
feeder until the
‘click’ is heard.
To service the printer card feed system, obtain a pre-saturated cleaning card specially designed for
the print
er.
A cl
eaning kit including samples of these cards is shipped with your Evolis printer.
Repeat
ed running of the card in the printer cleans the card feed rollers, the cleaning rollers, the
print head and the magnetic head (if y
our device has one).
Proceed as follows:
4.
Using the
lever, adjust
the thickness
of the card to
the MAX
position.
1. Remove the
card feeder
as indicated.
6. Open the
cover and
remove the
ribbon from
the printer
as shown.
7. Close the
cover of
the print
er
.
30
To Next Page
Loading...
