Need help?Do you have a question about the Evolis Pebble 4 and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Print Speed (YMCKO) | 150 cards/hour |
| Print Speed (Monochrome) | 1000 cards/hour |
| Card Capacity (Input) | 100 cards (0.76 mm - 30 mil) |
| Card Capacity (Output) | 50 cards (0.76 mm - 30 mil) |
| Memory | 16 MB RAM |
| Print Technology | Dye Sublimation/Resin Thermal Transfer |
| Card Thickness | 0.25 to 1.0 mm (10 to 40 mil) |
| Card Types | PVC, Composite PVC, PET, ABS, Special varnished |
| Connectivity | USB |
| Encoding Options | Magnetic stripe |
| Operating System Compatibility | Windows, Mac OS X, Linux |
| Power Supply | 100-240 V AC, 50/60 Hz |
Step-by-step guide for installing monochrome or color ribbons in the printer.
Details on card types supported and their loading procedure into the printer feeder.
Comprehensive guide for installing the Evolis printer driver on Windows systems.
Detailed settings available in the printer driver's graphic and tools tabs.
Guide to understanding various light states and their corresponding error or status interpretations.
General recommendations for routine printer upkeep.
Procedure for cleaning the printer's card feeding mechanism.
Instructions for cleaning or replacing the printer's cleaning roller.
Step-by-step guide for safely cleaning the printer's sensitive print head.
Guide for safely removing and installing a new print head.
Steps to resolve issues where cards get stuck in the printer.
Common printing problems and their initial troubleshooting steps.
Explanation of magnetic stripe encoding capabilities and setup.
To Next Page
