Evolis New Pebble User Manual

Table of contents
Chapter I – Setting Up Page 3
Introduction
Page 3
1. Unpacking my printer Page 3
2. Description of the printer and its functions Page 4
3. Installing my printer Page 5
a. Installation of the interface and the supply cable Page 5
b. Installation of the ribbon Page 6
c. Loading the cards Page 7
Chapter II – Printing Page 9
1. Installing my printer driver Page 9
2. Configuring the printing settings Page 10
3. My first cards Page 12
Chapter III – Cleaning Page 15
1. Automatic printer cleaning Page 15
2. Cleaning of the print head Page 17
3. Maintening the cleaning roller Page 18
Chapter IV – Assistance Page 19
1. Printer Control Panel Page 19
2. Troubleshooting Page 20
3. Customer Assistance Page 23
Chapter V – Specifications Page 24
Chapter VI – Evolis Warranty Page 25
1. Extent of the warranty Page 25
2. After sales service in the warranty period Page 26
3. After sales service outside the warranty period Page 26
Chapter VII – Supplies Page 27
Appendix A – Magnetic Encoding Page 29
Appendix B – Smart Card Contact Station Page 33
1
English
Français
Français
English

Evolis New Pebble Specifications

General

Print Resolution	300 dpi
Card Feeding	Automatic
Print Technology	Dye-sublimation
Card Capacity (input hopper)	100 cards
Connectivity	USB 2.0
Card Types	PVC cards
Operating Systems Supported	Windows
Card Dimensions	85.6 x 54 mm
Interface	USB
Power Supply	100-240 V, 50/60 Hz

Summary

Chapter I – Setting Up

Description of Printer and Functions

Details printer components and their respective functions, including the control panel.

Installing My Printer

Guide for connecting interface/power cables, installing ribbon, and loading cards.

Chapter II – Printing

Installing Printer Driver

Procedure for installing the Evolis Pebble printer driver on Windows systems.

Configuring Printing Settings

New Pebble Card Printer Driver Settings

Chapter III – Cleaning

Automatic Printer Cleaning

Explanation of the auto-clean alarm system and how to perform automatic cleaning.

Print Head Maintenance

Procedure for safely cleaning the printer's print head using a supplied swab.

Maintaining the Cleaning Roller

Chapter IV – Assistance

Troubleshooting

Common problems and solutions for printer issues like 'Nothing prints' or card jams.

Chapter V – Specifications

Specifications

Chapter VI – Evolis Warranty

Extent of the Warranty

Chapter VII – Supplies

Appendix A – Magnetic Encoding

Setting Windows Driver

Guide to configuring magnetic encoder functions through the Windows driver settings.

Cleaning of Magnetic Encoder

Appendix B – Smart Card Contact Station

Smart Card Contact Station Interface