2. Configuring the printing settings
Your printer has numerous setting functions in the print manager.
These printing settings are accessible :
• from S
tart in the Windows bar, Settings then Printers
1. Select Evolis Pebble
2. In File, in the bar of the Windows window menus, select Properties (for Windows
95/98/2000) or Default Document (for Windows NT 4.0).
• From your Windows software.
In
File, from the menu bar of your application, select Print or Printing Configuration.
Note that the procedures vary according to the type of software used and the Operating System
(95/98 /2000 or NT)
Default Evolis Pebble printer
To select the New Pebble printer as the default, proceed as follows :
1. Click on Start, in the Windows bar, select Settings then Printers.
2. Click on the New Pebble Printer icon then point to File in the menu bar.
3. Select Set as Default and close the window.
Evolis Pebble Properties
Different dialog boxes allow you :
• to carry out adjustments such as orientation and print quality.
• to manage the different printing and use modes of the appropriate ribbons.
• to select the printer port.
• to activate the various printer control and maintenance functions.
10
Français
FrançaisFrançais English
IMPORTANT !
Before using the printer, check that it is selected as the default
printer.
To Next Page
Loading...
