Evolis New Pebble - Appendix B - Smart Card Contact Station

33
English
Français
Français
English
Introduction
New Pebble printers equipped with a Smart Card Contact Station are known as New Pebble SMART.
The way that a New Pebble SMART printer works is identical to that of a New Pebble printer.
The Smart Card Contact Station allows to program the ISO 7816 chips.
1. Position of the Smart Card Contact Station
The Smart Card Contact Station is a device fitted in New
Pebble SMART printers in the factory. The contact station is
positioned above the path taken by the cards, after the print
head.
NOTE : the personalisation of a chip is always performed
before a printing session.
Smart Card
Contact
Station
IMPORTANT !
Use only Smart Cards that comply with ISO Standard 7816-2.
Do not print on the chip of the card.
B.
Appendix B
Smart Card Contact Station