Evolis New Pebble - New Pebble Card Printer Driver Settings

New Pebble Card Printer Driver Settings
To access the settings from the Word window :
1. In the menu bar point to File and select
"Print"
2. The dialog box shows you that the Evolis
printer is selected. Then click on
Properties.
3. The dialog box of the Evolis Pebble driver
opens
2
. Do not forget to refer to the help
for each dialogue box
The print settings for this graphic example are :
1.
"Characteristics" Dialog Box select :
• 5 Panel ribbon
• Landscape orientation
• Copy (number)
2.
"Graphic" Dialog Box select :
•
Black Panel : "Only the Black Characters"
• Varnish panel : "Full varnish"
3. Click on Apply, if you change a setting, then on OK to successively close each dialog box.
4. On returning to the main window click on
OK to start printing.
14
Français
FrançaisFrançais English
2
Go over paragraph 2 again if necessary