27
Servicing the Print Head
NOTE
Recommended cleaning cycle: whenever the ribbon is changed.
Servicing accessory: Special cotton swab soaked in isopropyl alcohol.
To maintain the original print quality and to absorb any surplus ink on the print head, we recommend that you regularly clean the print head (whenever the
ribbon is changed and during routine cleaning) using the cotton swabs supplied by Evolis. You must also protect the print head and its components from any
discharge of static electricity.
Unplug the printer from its power supply before cleaning the print head.
Follow the cleaning cycles scrupulously.
Avoid any contact between the print head and any metal or sharp objects.
Avoid touching the print head directly with your fingers, as this could affect print quality or permanently damage the print head.
To Next Page
Loading...