The EazyPod Complete is truly multi-functional. It can be run in several different
ways for different applications.
The EazyPod Complete can be used:
• as a stand alone filter on a small pond
• as a complete filter on a quarantine system
• as a pre-filter at the front of any new or existing system
• as a polisher at the end of any system
• off a mid water feed to aid mechanical filtration
• on a skimmer line as a mechanical filter
Remember that if you use the EazyPod Complete solely as a mechanical filter,
you will also get an enhanced biological benefit in your system.
EazyPod Complete Specifications and Flow Rates
Follow this manual carefully and your filter will provide a perfect environment for
your fish. One of the factors that can have a significant influence on our ponds is the
turn over rate. This is the time that it takes for the total water volume of the pond to
pass through the filter system once. On EazyPod Complete ponds, where it is used
as the only filtration system, a total pond volume turn over of every 1 to 2 hours is
required.
Therefore if you have a 10,000 litre pond, a minimum rate of 5,000 litres per hour
is needed giving a 2 hour turnover, although you could also run at 10,000 litres per
hour giving a turnover rate of once per hour.
6
SPECIFICATION AND FLOW RATES
Max flow rate: 10,000 litres/hr 2,200 UK gallons/hr 2,640 US gallons/hr
Max pond size for all fish
10,000 litres 2,200 UK gallons 2,666 US gallons
Max pond size with
the addition of
supplementary UV
20,000 litres 4,400 UK gallons 5,333 US gallons
K1 Media 30 litres
Max feed rate 100 - 120g per day
AirPump EA AirPump 70
UV Bulb Specification 18 Watt PL-L UV-C
UV Bulb Life Recommended bulb change every 8000 hours
To Next Page
Loading...
