INTRODUCTION
-1-
Thank you for purchasing your Nexus Eazy™ lter. We are sure you will be
delighted with its performance. The Nexus System is supplied gravity fed, though
is easily adapted to become a pump fed unit. For pump fed installations refer to
the relevant pages of this brochure and read thoroughly before installation.
The Nexus Eazy ltration unit has been designed on the principles of minimum
maintenance, high performance and a compact foot print. This design delivers
optimum water quality by using the Kaldnes Moving Bed™ process.
Your Nexus Pack should contain:
Figure Part No Description
1.1 NPC.125 4”-4” (110-125mm) rubber boot
1.2 NAC.1004 4”-2” (122-68mm) rubber boot
1.3 825-50-50 1.5”(50mm) single union ball valve
1.4 1200-400/100-400 inlet slide plate (200/300)
1.5 5000-707 safety outlet grill
1.6 MEDIA30L / 45L bag Kaldnes K1 for Eazy (30L - 200/ 45L - 300)
1.7 MEDIA50L 50L bag Kaldnes K1 (1x Nexus 200, 2x for Nexus 300)
1.8 5000-329 Eazy isolation pipe
Fig 1.4
Fig 1.3Fig 1.2.Fig 1.1
Fig 1.6
Fig 1.8
Fig 1.5
Fig 1.7
To Next Page
Loading...
