13
SKIMMER LINE INSTALLATION
Install a Tempest Filter on a skimmer line.
The slide valves on the Tempest Filter enable connection
to 1½" pressure pipe. If installing the Tempest Filter using
flexible hose you will need to fit a reducing sleeve
(EA Code: M35-050) and a 1½" solvent stepped hosetail
(EA Code: HOSETAIL15) inside each slide valve.
POND
OPTIMUM
FLOW RATE:
5,000 LPH
1,100 GPH
1,320 US GPH
IMPORTANT: Ensure slide valves are fitted to inlet and outlet of
the Tempest filter.
IMPORTANT: We always recommend fitting unions when installing in
line equipment on your system which help when removing the filter.
TEMPEST FILTER INSTALLATION IDEAS
To Next Page
Loading...
