EasyManua.ls Logo

Evolution D3 LIFTED 2022 - Page 40

Evolution D3 LIFTED 2022
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BATTERY CHARGER
Be familiar with vehicle features before attempting any operations.
D3 Lifted User’s Manual Page35.
Flashes ( " " means pause 1s ) Cause Solution
No load
Check if happens:the connection
of battery and charger is loose, the
battery defective, or the battery
voltage is too low.
Over voltage or over current
If the error occurs after restart
,return it to factory repair.
The ambient temperature is
too high or too low
Please check if the ambient
temperature is too high and if
ventilation is good and the
battery temp sensor is good
Charger overheating
Please check if ambient
temperature is too high and if
ventilation is good.
Output Under- Voltage
Please return it to the factory.
Replace new charger
Input AC abnormality
Please check the input voltage and
the plug poor contact.
After anyone of the mentioned
faults above repeats five times,
the fault code appears.
Re-up electricity, match the indicator
state to the mentioned faults above
then get the corresponding solution.
CHARGER LED DISPLAY
LED FAULT CODES
LED Light Indication
Red LED light flashing Charging
Solid Green light Charge completely
Red and Green
flashing in order
Refer to the Troubleshooting table
CHARGING
FULL

Table of Contents