BATTERY CHARGER
Be familiar with vehicle features before attempting any operations.
D3 Lifted Userās Manual Page36.
1
2
HOW TO USE CHARGER
WARNING
TO DECREASE THE POSSIBILITY OF ELECTRICAL SHOCK OR ELECTROCUTION,
MAKE SURE THE CHARGER PLUG IS NOT DAMAGED. THE POWER AC CORD HAS A
PLUG WITH GROUND POST. DO NOT MOVE, CUT OR BEND THE GROUND POST.
cable. Replace the broken AC power cord.
1. Inspect the charger cord to check if there is broken on damaged on the power AC cord and
2. Plug the AC charge handle into the vehicle receptacle completely.
3. Plug the Power AC cord into the ground power completely.
4. The charger will automatically start in several seconds after plugging in the AC power
cord.
5. The charger will automatically stop when the batteries are fully charged.
6- Remove the AC charge cord before operating the vehicle.
To Next Page
Loading...