BATTERY CHARGER
Be familiar with vehicle features before attempting any operations.
D3 Lifted User’s Manual Page37.
CHARGER MAINTENANCE
WARNING
IF THE PLUG PINS ARE BENT, SPEAK WITH YOUR LOCAL DEALER OR DISTRIBUTOR
FOR REPLACING. DO NOT TRY TO REPAIR THE AC CORD PLUG OR PINS.
ELECTRICAL CORDS
Examine electrical cords for wear and damage before use. Immediately replace electrical cords for:
• Cracks
• Cuts
• Frayed wiring
• Insulation damage
• Loose connections
• Splices
ELECTRICAL PLUGS AND RECEPTACLES
Examine electrical plugs for wear and damage before use. Immediately replace electrical plugs for:
• Bent pins
• Corrosion
• Cracks
• Loose connections
• Missing pins
CLEAN THE ELECTRICAL PLUGS AND RECEPTACLES
1. Disconnect the AC cord from the power source.
2. Disconnect the AC cord from the battery charger.
3. Disconnect the DC cord from the vehicle charger receptacle.
4. Apply electrical contact cleaner to the electrical plugs and receptacles. Refer to the
manufacturerinstructions.
5. Clean the electrical plugs and receptacles.
6. Lightly lubricate the electrical plugs and receptacles with WD-40®.
To Next Page
Loading...
Need help?
General