Need help?Do you have a question about the Evolution F255 SMS and is the answer not in the manual?
General| Blade Diameter | 255 mm |
|---|---|
| Bore Size | 25.4 mm |
| Mild Steel Plate Thickness (Max.) | 6 mm |
| Mild Steel Box Section Wall Thickness (Max.) | 3 mm |
| Handle Material | Plastic |
| Blade Material | TCT |
| Teeth Per Inch | 24 |
Details regarding product warranty and registration.
Specifies the designed purpose and applications of the power tool.
Outlines forbidden applications and modifications for the power tool.
Guidelines for safe electrical connection and usage of the tool.
Safety considerations when operating the tool in outdoor environments.
Covers general safety rules for operating power tools.
Instructions on securing, positioning, and handling workpieces safely during cuts.
Recommendations for protective gear to ensure operator safety and health.
Guidance on executing cuts correctly and safely with the machine.
Further safety tips and warnings for operating the mitre saw.
Steps for safely unpacking the machine and checking contents.
Lists the tools required for assembling and adjusting the machine.
Identifies the main parts of the machine that require assembly.
Procedure to unlatch and raise the cutting head for blade installation or other tasks.
Steps for safely installing and removing the saw blade.
Procedures for adjusting the 0° and 45° bevel stops and pointers for accuracy.
Steps to align the bevel pointer accurately with the 0° mark on the scale.
Critical safety information and warnings related to the laser guide.
Instructions on how to use the laser guide for accurate cutting.
Step-by-step guide for aligning the laser beam accurately.
Guidelines for securely fixing the mitre saw to a workbench or stand.
Instructions for setting up the saw for portable operation on a stable base.
Guidance on maintaining safe body and hand positions during operation.
Explanation of the trigger switch function for starting and stopping the motor.
Essential steps and checks before performing any cut on the machine.
Instructions for performing standard chop cuts with the mitre saw.
How to perform slide cuts using the machine's carriage system.
Steps for setting and performing mitre cuts at various angles.
Instructions for tilting the cutting head to make bevel cuts.
How to perform cuts combining mitre and bevel angles simultaneously.
Procedure for configuring the saw to cut crown moulding angles.
Information on available optional accessories for enhanced functionality.
Guidelines for regular maintenance and care of the mitre saw.
Advice on responsible disposal of electrical waste and recycling.
Checklist for verifying correct assembly and setup before first use.
Final safety verification steps to ensure the machine is safe to operate.
To Next Page
