Need help?Do you have a question about the Evolution Fury3-B and is the answer not in the manual?
Use mild soap and damp cloth for cleaning; avoid liquids inside the tool.
Bearings are pre-lubricated for the unit's life; no further lubrication needed.
Ensure secure workpiece positioning and clear blade area before operation.
Keep hands away from cutting area, secure workpiece, and maintain balance.
Lower saw head to cut workpiece after reaching full speed; allow blade to stop.
Adjust table angle using lock and lever, then start saw at full speed for cut.
Loosen bevel lock, adjust to desired angle, and stand to the left of the handle.
Select desired mitre and bevel positions for a compound cut operation.
Position and cut bowed material carefully to avoid pinching or sudden movement.
Securely mount saw to workbench or leg set using provided holes.
Use correct blade, match rotation, secure with arbor screw and moderate force.
Adjust mitre and bevel angles using designated locks and levers.
Turn off, unplug, wait for parts to stop, then remove jammed material.
Follow all warnings, keep area clean, wear apparel, use safety glasses, and secure work.
Handle heavy saw with care, lift with legs, and avoid carrying by power cord.
To Next Page
General
