To Next PageTo Next Page
Need help?Do you have a question about the Evolution Fury 3-XL and is the answer not in the manual?
Details on product registration and guarantee validation process.
Explains the terms and conditions of the Evolution Limited Guarantee.
Information on potential health effects of vibration exposure.
Defines the proper applications and forbidden uses of the power tool.
Safety advice for electrical connections and outdoor operation.
Basic safety precautions and user suitability warnings.
Safety guidelines for the work area, including lighting and cleanness.
Safety precautions related to electrical connections and grounding.
Guidelines for operator alertness, PPE, and proper handling.
Guidelines for safe use, maintenance, and storage of power tools.
Information on servicing and health risks from dust.
Crucial safety instructions for handling and using saw blades.
Essential PPE for operating the mitre saw.
Guidelines for secure work piece placement and stable machine operation.
Warnings about eye protection and safety tips for transporting the saw.
Procedure for unpacking and verifying supplied items.
Details on available accessories to enhance machine performance.
Instructions for permanently fixing or setting up for portable use.
How to use the hold down clamp to secure workpieces.
Details on using the laser guide for precise cutting.
Adjusting the laser guide for European plug models.
Procedure to verify the alignment of the laser guide.
Procedure to check laser alignment using a cardboard jig.
Critical safety warnings and guidelines for laser use.
How to use the laser guide for precise cuts.
Method for aligning cuts using the laser guide for unknown angles.
Using the depth stop and information on the laser lens cap.
How to adjust the upper fence section for clearance.
Essential safety checks before connecting power and operating.
Guidelines for safe hand placement and body posture.
Instructions for checking and adjusting cutting angles.
Adjusting the 0° bevel stop and pointer for accuracy.
Adjusting 45° bevel stop and setting up for crown moulding.
Procedure to align the fence square to the blade.
How to adjust the mitre angle pointer.
Steps for releasing and raising the cutting head.
How to operate the saw and perform chop cuts.
Instructions for bevel cuts and repositioning the lever.
Procedure to set up the machine for crown moulding cuts.
How to perform compound cuts and cut bowed material.
Procedures for clearing jams and supporting long workpieces.
Instructions for fitting and using the dust bag for wood cutting.
Using blanking plugs and adapter tubes for dust extraction.
Steps for fitting and adjusting the repeat stop for repetitive cuts.
Using port accessories with the repeat stop.
Procedures for cleaning the machine and replacing table inserts.
Information on responsible disposal of electrical equipment.
Details of the product and its conformity documents.
Information on the holder of the technical documentation.
Details of the 255mm model and its conformity documents.
General
