Evolution F210 - User Manual

Original Instructions
ursprünglichen Anweisungen
Instructions d’origine
originele handleiding
Original written in UK English Date Published: 01 / 04 / 2016
CMS
F210

Summary

INTRODUCTION

EVOLUTION LIMITED GUARANTEE

Details the warranty terms and conditions for Evolution Power Tools.

INTENDED USE OF THIS POWER TOOL

PROHIBITED USE OF THIS POWER TOOL

POWER TOOL GENERAL SAFETY INSTRUCTIONS

GETTING STARTED

MACHINE OVERVIEW

ASSEMBLY AND PREPARATION

OPERATING INSTRUCTIONS

BODY AND HAND POSITIONING

ADJUSTMENT OF PRECISION ANGLES

0° Bevel Stop Adjustment

Procedure to set the 0-degree bevel stop accurately.

45° BEVEL STOP ADJUSTMENT

FENCE ALIGNMENT

FINAL ADJUSTMENT CHECKS

PREPARING TO MAKE A CUT

THE MOTOR ON;OFF SWITCH

CHOP CUTTING

MITRE CUTTING

BEVEL CUTTING TILTING THE CUTTING HEAD

To tilt the cutting head to the left

Step-by-step guide to tilt the cutting head for bevel cuts.

COMPOUND CUTTING

CLEARING JAMMED MATERIAL

INSTALLING OR REMOVING A BLADE

MAINTENANCE

Evolution F210 Specifications