Evolution F210 User Manual

5
www.evolutionpowertools.com
EN
Warning: Wear hearing protection!
Handling
• Handlethemachinewithcare,
allowing the machine to do the work.
• Avoidusingexcessivephysicaleort
on any of the machines controls.
• Consideryoursecurityandstability,
and the orientation of the machine
during use.
Work Surface
• Considertheworksurfacematerial;
its condition, density, strength,
rigidity and orientation.
WARNING: The vibration emission during
actualuseofthepowertoolcandierfromthe
declared total value depending on the ways
in which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
thetoolisswitchedo,whenitisrunningidle,
in addition to trigger time).
(1.8)
LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools
for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Manufacturing Date Code
The manufacturing date code is the first part
of the serial number, found on the motor
housing of the machine. Evolution serial
numbers begin with the abbreviation of the
machine followed by a letter. A = January, B =
February and so on. The following 2 numbers
are the year of manufacture. 09 = 2009, 10 =
2010, etc. (Example of batch code: XXX-A10)
(1.9)
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
min
-1
Speed
~
Alternating Current
n
o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch
Wear Dust Protection
Wear Safety Gloves
Read Instructions
CE Certification
EAC Certification
Triman - Waste Collection
& Recycling
Waste Electrical &
Electronic Equipment
Warning
Protection Class II
Double Insulated

Evolution F210 Specifications

General

Brand	Evolution
Model	F210
Category	Saw
Language	English