22
www.evolutionpowertools.com
(6.1)
MAINTENANCE
Note: Any maintenance must be carried
outwiththemachineswitchedoand
disconnected from the mains/battery power
supply. Check that all safety features and
guards operating correctly on a regular basis.
Only use this machine if all guards/safety
features are fully operational. All motor
bearings in this machine are lubricated for life.
No further lubrication is required.
Use a clean, slightly damp cloth to clean
the plastic parts of the machine. Do not use
solvents or similar products which could
damage the plastic parts.
WARNING: Do not attempt to clean by
inserting pointed objects through openings
in the machines casings etc. The machines air
vents should be cleaned using compressed
dry air. Excessive sparking may indicate the
presence of dirt in the motor or worn out
carbon brushes.
(6.2)
If this is suspected have the machine serviced
and the brushes replaced by a qualied
technician.
(6.4)
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer for
recycling advice.
To Next Page
Loading...
Need help?
General
