Need help?Do you have a question about the Evolution Fury 6 and is the answer not in the manual?
Basic safety precautions to reduce risks of fire, shock, and injury.
Specific safety guidelines for the table mitre saw.
Explanation of symbols used on the machine for safety.
Technical details including motor, blade, capacity, and noise data.
Instructions for securely fixing the saw to a workbench or leg set.
Instructions for fitting stabilising arms for portable operation.
Steps to set up the machine for mitre saw use.
Covers general operations like releasing the head, preparing cuts, and switch use.
Details chop, mitre, bevel, and compound cutting methods.
Fence adjustment and clearing jammed material.
Steps to set up the machine for table saw use.
Aligning the fence assembly for rip cutting.
General operations for the table saw configuration.
Instructions for performing rip cuts on the table saw.
Step-by-step guide for changing the saw blade.
How to check and adjust bevel angles for accuracy.
Procedures for replacing the fuse and plug.
Guidance on responsible disposal of electrical products.
Exploded view of the machine with part numbers.
To Next Page
General
