Evolution F255 SMS - MACHINE SPECIFICATIONS

MACHINE SPECIFICATIONS
MACHINE METRIC
IMPERIAL
Motor (220-240V ~ 50 Hz) 1600W 9A
Speed No Load 2500 min
-1
2500 rpm
Weight (Net) 15.3kg 33.7lb
Dust Port Diameter 35mm 1 -3/8 In.
Tool Dimensions (H x W x L) (0° / 0°)
(Note: Dimensions taken with saw head down.)
360 x 705 x 730mm
14- 3/16 x 27-3/4
x 28-47/64 In.
Cable Length 2m 6ft 6 In.
CUTTING CAPACITIES METRIC IMPERIAL
Mild Steel Plate - Max Thickness 3mm 1/8 In.
Mild Steel Box Section - Max Wall Thickness
(50mm mild steel box section.)
3mm 1/8 In.
Wood – Max section 300 x 80 mm 11-3/4 x 3-1/8 In.
Minimum size work-piece
(Note: Any work-piece smaller than the recommended minimum
work-piece requires additional support before cutting.)
L:140 x W:20 x D:3mm
L:5-1/2 x
W:7/8 x D:1/4 In.
MAXIMUM CUTTING ANGLES LEFT RIGHT
Mitre 50˚ 50˚
Bevel 0˚ - 45˚ N/A
MITRE BEVEL MAX WIDTH MAX DEPTH
0° 0° 300mm (11-3/4 In.) 80mm (3-1/8 In.)
0° 45° 300mm (11-3/4 In.) 45mm (1-3/4 In.)
45° 0° 210mm (8-1/4 In.) 80mm (3-1/8 In.)
45° 45° 210mm (8-1/4 In.) 45mm (1-3/4 In.)
50˚ 0˚ 192mm (7-9/16 In.) 80mm (3-1/8 In.)
50˚ 45˚ 192mm (7-9/16 In.) 45mm (1-3/4 In.)
BLADE DIMENSIONS METRIC IMPERIAL
Diameter 255mm 10 In.
Bore 25.4mm 1 In.
Thickness 2mm 0-5/64 In.
LASER
Laser Class Class 2
Laser Source Laser Diode
Laser Output Power (Max) ≤1mW
Wave Length (Nm) 650
NOISE EMISSION DATA*
Sound Pressure L
P
A (No-Load) 110V: 95,8 dB(A) / 220-240V: 95,8 dB(A)
Sound Power Level L
W
A (No-Load) 110V: 108,8 dB(A) / 220-240V: 108,8 dB(A)
Uncertainty, K
pA
& K
WA
K=3 dB(A)
*Noise emission test according to EN 62841-1 & EN 62841-3-9.
4
www.evolutionpowertools.com