Need help?Do you have a question about the Evolution EvoSaw 230 and is the answer not in the manual?
Explains the terms, conditions, and limitations of the manufacturer's warranty.
Outlines the maximum dimensions for cutting various materials like box sections and plate.
Lists motor power, speed, weight, and blade dimensions (diameter, bore, teeth).
Presents measured sound pressure, sound power, and vibration levels during operation.
Discusses vibration standards, health effects, and handling/work surface considerations.
Advises users to ensure warning and instruction labels are present and undamaged.
Specifies the types of materials and cutting tasks the saw is designed for.
Details what the tool must not be used for or modified into.
Outlines restrictions for persons with reduced capabilities and supervision requirements for children.
Covers electrical safety for plugs/cords and precautions for outdoor operation.
General rules for keeping the workspace clean, avoiding explosive atmospheres, and managing bystanders.
General electrical safety rules, including plug matching and avoiding grounded surfaces.
Emphasizes operator alertness, common sense, and wearing appropriate PPE.
Instructions on ensuring the switch is off and maintaining balance and proper attire.
Covers using the right tool, safe storage, maintenance checks, and keeping tools sharp.
Recommends qualified servicing and warns about dust particle hazards and protective measures.
Essential safety points on hand/body safety, cutting depth, workpiece securing, and blade/accessory use.
Explains kickback causes and provides operator techniques for avoidance.
Advice on supporting panels, blade depth, and using sharp, undamaged blades.
Details checks for lower guard function and manual retraction procedures.
Emphasizes observing lower guard coverage and warns against using HSS blades.
Covers inspecting the machine/blade and checking accessory RPM compatibility.
Guides on carefully unpacking, checking contents, and handling packaging responsibly.
Identifies and describes the main parts of the saw, including switches and guards.
Reminds users to disconnect power before adjustments and not to alter the mains lead.
Stresses using genuine blades and guides on removing the chip collector and wrench.
Details using the arbor lock, cleaning flanges, and ensuring correct blade rotation.
Instructions on how to attach, adjust, and ensure the parallel guide is parallel to the blade.
Guides on attaching the handle and using the lever lock to set cutting depth.
Details setting the bevel angle and performing routine pre-operation checks.
Explains how to safely engage the safety lock and trigger switch to start the motor.
Describes the chip collector's function and provides instructions for its removal and emptying.
Explains how to use the guide slots for 90-degree and 45-degree cuts.
Guides on inserting batteries, activating, and aligning the laser guide.
Details laser classification, hazards, and strict rules for safe beam usage.
Advises on cutting technique, PPE, and actions to take if the motor stops or stalls.
Emphasizes disconnecting power for maintenance and procedures for cleaning the machine.
Guides on inspecting carbon brushes for wear and the process for replacement.
Advises on responsible disposal of electrical products and recycling options.
Lists product details and confirms compliance with relevant EU directives and standards.
Identifies the holder of the technical documentation related to the product's compliance.
Provides contact addresses and phone numbers for different regions (UK, US, JP, EU).
Encourages users to visit the website or download the QR Reader App.
To Next Page
General
