Need help?Do you have a question about the Evolution S355 MCS and is the answer not in the manual?
Details the maximum dimensions of materials the machine can cut at various angles.
Specifies the intended use of the power tool with Evolution blades and compatible materials.
Outlines prohibited uses of the mitre saw and safety warnings for non-qualified users.
Instructions on cutting specific materials and avoiding abrasive wheels for ferrous metals.
Emphasizes secure clamping, safe hand positioning, and avoiding freehand cuts.
Details correct cutting motion, hand placement relative to the blade, and inspecting workpieces.
Covers workpiece alignment, cleanliness, single-piece cutting, and blade jamming procedures.
Details safe clamping, avoiding workpiece jamming, and proper blade speed.
Identifies and labels the main parts of the machine shown in the diagram.
Labels and identifies additional components of the machine in a separate diagram.
Guides on assembling the main parts like base, cutting head, and clamps.
Steps for securely mounting the saw to a workbench for stability and safety.
Step-by-step guide on how to safely remove the saw blade using provided tools.
Instructions for correctly installing a new blade, ensuring proper orientation and security.
Instructions for fitting the cross bar and front clamps, and adjusting their height.
Steps for fitting the top clamp to the rear fence in various positions.
How to set the mitre angle and ensure clamp clearance before cutting.
Essential safety checks to perform before using the machine, including guards and blade security.
Step-by-step guide on performing cuts, including lowering the head and pressure application.
Crucial warning against cutting asbestos or materials suspected of containing it.
To Next Page
General
