Need help?Do you have a question about the Evolution S185CCSL and is the answer not in the manual?
General| Blade Diameter | 185 mm |
|---|---|
| Bore | 20 mm |
| Max. Cut Depth (0°) | 64 mm |
| Motor Power | 1600 W |
| Speed No Load | 3700 rpm |
| Mild Steel Plate Thickness (Max.) | 6 mm |
| Weight | 5.1 kg |
| Saw Type | Circular Saw |
| Bevel Capacity | 0° - 45° |
Contact details and warranty registration process for Evolution Power Tools.
Explains vibration data and identifies key safety symbols used in the manual.
Defines correct applications, forbidden uses, and electrical safety rules.
Safety guidelines for outdoor operation and maintaining a clean work environment.
Electrical connection safety and essential personal protective measures.
Proper tool handling, maintenance, repair, and health advice on dust exposure.
Safe cutting practices, identifying kickback causes, and prevention methods.
Unpacking procedures, list of supplied items, and extra safety for circular saws.
Details on included accessories and the importance of the instruction manual.
Step-by-step guide for safely changing the saw blade using the provided tool.
Instructions on fitting, adjusting, and using the parallel edge guide for rip cuts.
Procedures to adjust the blade depth and bevel angle for precise cuts.
Essential safety checks before use and recommended personal protective equipment.
Functionality of the sight shield, debris blower, and how to operate the trigger switch.
Tips for safe cutting and how to check/adjust the bevel angle settings.
Guide to checking/replacing carbon brushes and routine machine cleaning.
Advice on clearing debris from guards and environmentally responsible disposal.
To Next Page
