8
www.evolutionpowertools.com
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
Min
-1
Speed
~
Alternating Current
n
o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Read Instructions
CE Certification
CSA Certification
Waste Electrical &
Electronic Equipment
Warning
INTENDED USE
OF THIS POWER TOOL
WARNING: This product is a Steel Cutting
Hand Held Circular Saw and has been
designed to be used with special Evolution
blades. Only use blades designed for use in
this machine and/or those recommended
specifically by Evolution Power Tools Ltd.
When fitted with an appropriate blade this
machine can be used to cut:
Mild Steel
Aluminium (blade change recommended)
Stainless Steel (blade change recommended)
Lumber (blade change recommended)
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a Steel Cutting
Hand Held Circular Saw and must only be
used as such. It must not be modified in any
way, or used to power any other equipment or
drive any other accessories other than those
mentioned in this Instruction Manual.
WARNING: This machine is not intended
for use by persons (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning the safe use of the machine by a
person responsible for their safety and who is
competent in its safe use.
Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with, this machine.
To Next Page
Loading...
