Evolution R255 TBL - Page 27

DECLARATION OF CONFORMITY
Evolution Power Tools Ltd. declares that the following products:
255mm R255TBL Table Saw
Model No. 119-0001, 119-0002, 119-0003
255mm R255TBLX Table Saw
Model No. 119-0006, 119-0007, 119-0008
255mm R255TBL+ Table Saw
Model No. 119-0011, 119-0012, 119-0013
255mm R255TBLX+ Table Saw
Model No. 119-0016, 119-0017, 119-0018
Brand: Evolution
Comply with the following directives and standards:
2006/42/EC, 2014/30/EU, 2000/14/EC & 2005/88/EC,
2011/65/EU & (EU)2015/863, 2012/19/EU.
EN 62841-1:2015/A11:2022 • EN 62841-3-1:2014/A12:2021
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
EN IEC 61000-3-2-2019+A1:2021 • EN 61000-3-3:2013+A2:2021
110V: The notified body TUV SUD Product Service GmbH (NB 0123), Ridlerstrabe
65,80339 MUNCHEN, Germany, performed EC type-examination and issued the
EU-type examination certificate: M6A 070718 0393 Rev.00
230V: The notified body TUV SUD Product Service GmbH (NB 0123), Ridlerstrabe
65,80339 MUNCHEN, Germany, performed EC type-examination and issued the
EU-type examination certificate: M6A 070718 03940 Rev.00
The undersigned technical document holder makes this
declaration on behalf of Evolution Power Tools Ltd.
Print: Barry Bloomer
Chief Executive Officer
Date: 13/12/2023
UK: Evolution Power Tools Ltd. Venture One, Longacre
Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine,
33560, Carbon-Blanc, Bordeaux, France.
18.7
≠ 45˚
18.8
= 45˚
= 45
= 45


S
DÉCLARATION DE CONFORMITÉ
Evolution Power Tools Ltd. déclare que ce produit:
Scie sur table de 255 mm R255TBL
Model No. 119-0001, 119-0002, 119-0003
Scie sur table de 255 mm R255TBLX
Model No. 119-0006, 119-0007, 119-0008
Scie sur table de 255 mm R255TBL+
Model No. 119-0011, 119-0012, 119-0013
Scie sur table de 255 mm R255TBLX+
Model No. 119-0016, 119-0017, 119-0018
Marque: Evolution
Est conforme aux directives et normes suivantes:
2006/42/EC, 2014/30/EU, 2000/14/EC & 2005/88/EC,
2011/65/EU & (EU)2015/863, 2012/19/EU.
EN 62841-1:2015/A11:2022 • EN 62841-3-1:2014/A12:2021
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
EN IEC 61000-3-2-2019+A1:2021 • EN 61000-3-3:2013+A2:2021
Le détenteur du document technique soussigné fait cette
déclaration au nom de Evolution Power Tools Ltd.
Nom en caractères d’imprimerie:
Barry Bloomer
PDG
Date : 13/12/2023
RU: Evolution Power Tools Ltd. Venture One, Longacre
Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine,
33560, Carbon-Blanc, Bordeaux, France.
FR
EN