10
www.evolutionpowertools.com
21. Never leave tool running unattended.
Turn power off. Don’t leave the tool until it
comes to a complete stop.
(4.1) GETTING STARTED - UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good condition
and account for all the accessories listed in this
manual. Also make sure that all the accessories
are complete.
If any parts are found to be missing, the machine
and its accessories should be returned together
in their original packaging to the retailer.
Do not throw the packaging away;
keep it safe throughout the guarantee period.
Dispose of the packaging in an environmentally
responsible manner.
Recycle if possible.
Do not let children play with empty plastic bags
due to the risk of suffocation.
SERIAL NO. / BATCH CODE
The serial number can be found on the motor
housing of the machine.
For instructions on how to identify the batch
code, please contact the Evolution Power Tools
helpline or go to:
www.evolutionpowertools.com
(4.2) ITEMS SUPPLIED
Description Quantity
R355CPS Saw 1
Instruction Manual 1
14” (355mm)
Multi-Material TCT Blade
1
Hex Key 8mm (Blade Change) 1
V-Block 1
(4.4) REPLACEMENT BLADES
Description Part No
14” (355mm)
Multi-Material Cutting
TCT Blade
(UK/EU) RAGEBLADE-
355MULTI
(USA) RAGE355BLADE
14” (355mm)
Diamond Blade
(UK/EU) RAGEBLADE-
355DIAMOND
(USA) 14BLADEDM
14” (355mm) Mild Steel
Cutting Blade
(UK/EU) 66TBLADE
(USA) 14BLADEST
14” (355mm) Stainless
Steel Cutting Blade
(UK/EU) 90TBLADE
(USA) 14BLADESS
14” (355mm) Thin Steel
Cutting Blade
(UK/EU) EVO-
BLADE355TS
(USA) 14BLADETS
14” (355mm) Aluminium/
Aluminum Cutting Blade
(UK/EU) 80TBLADE14
(USA) 14BLADEAL
14” (355mm) Wood Cut-
ting Blade
(USA) 14BLADEWD
15” (380mm) Mild Steel
Cutting Blade
(USA) 15BLADEST
NOTE: This machine is supplied with 2 accessories.
The 8mm hex key should be kept in the dedicated
tool storage located in the front of the base when
not in use. The V-block adaptor should be used
where possible, and kept safely away from the
machine when not in use.
www.fnglob.pl
To Next Page
Loading...
Need help?
General