4
www.evolutionpowertools.com
SPECIFICATIONS R355CPS
MACHINE METRIC IMPERIAL
Motor (UK/EU) 220V-240V ~
50Hz
2200W
Motor (UK) 110V ~ 50Hz 1600W
Motor (USA) 120V ~ 60Hz 15A
Motor (AUS) 240V ~ 50Hz 2200W
Speed (No Load) @ 110V 1550 min
-1
1550 rpm
Speed (No Load) @ 120V 1450 min
-1
1450 rpm
Speed (No Load) @ 220-240V 1550 min
-1
1550 rpm
Weight (With Blade) 21.5 kg 47 lbs
Power Cord 2 m 6 feet
CUTTING CAPACITY
Mild Steel Plate (Max.
Thickness)
6mm 1/4”
Stainless Steel Plate (Max.
Thickness)
N/A N/A
Square Tube at 90˚ 120 x 120mm 4-3/4” x 4-3/4”
Square Tube at 45˚ 89 x 89mm 3-1/2” x 3-1/2”
Rectangle Tube at 90° 95 x 180mm 3-3/4” x 7-1/8”
Rectangle Tube at 45° 78 x 110mm 3-1/8” x 4-3/8”
Round Tube at 90° Ø 130mm Ø 5-1/8”
Round Tube at 45° Ø 105mm Ø 4-1/8”
Minimum Cut Off Piece Length 8mm 5/16”
BLADE
Diameter 355mm 14”
Bore 25.4mm 1”
Kerf 2.2mm 0-3/32”
NOISE EMISSION DATA*
Sound Pressure Level L
PA
110V: 100,5dB(A), K=3dB(A) /
220-240V: 97,3dB(A), K=3dB(A)
Sound Power Level L
WA
110V: 111,5dB(A), K=3dB(A) /
220-240V: 108,3dB(A), K=3dB(A)
MODELS
United Kingdom (230V) 083-0001, (110v) 083-0002
United States (120V) 083-0004
Europe (230V) 083-0003
Australia (230V) 083-0006
WARNING: Due to the power input of this product on start up, voltage
drops may occur and this can influence other equipment (e.g. dimming
lights). So for technical reasons we advise, if the mains-impedance is
Zmax< 0.264Ω, these disturbances are not expected. If you require
further clarification, you may contact your local power supply authority.
Fig. 13
Fig. 14
a
b
www.fnglob.pl
To Next Page
Loading...
Need help?
General