5
www.evolutionpowertools.com
EN
DE
LABELS & SYMBOLS
WARNING: Do not operate machine if warning
and/or instruction labels are missing or
damaged. Contact Evolution Power Tools or
your supplier for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Symbol Description
V Volts
A Amperes
Hz Hertz
Min
-1
Speed
~ Alternating
Current
n
o
No Load
Speed
Wear Safety
Goggles
Wear Ear
Protection
Do Not Touch
Keep Hands
Away
Wear Dust
Protection
Restriction
of Hazardous
Substances
Directive
CE certification
Waste Electrical
& Electronic
Equipment
Read Manual
Warning
Laser Warning
VIBRATION
Note: The vibration measurement was made
under standard conditions in accordance with:
BS EN 610291.2009.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared total value depending on the ways
in which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched o, when it is running idle,
in addition to trigger time)
INTENDED USE OF THIS POWER TOOL
WARNING: This product is a Multipurpose
Jigsaw and has been designed to be used with
special Evolution multipurpose blades. Only
use blades designed for use in this machine
and/or those recommended specically by
Evolution Power Tools Ltd.
When tted with a correct blade
this machine can be used to cut:
• Wood
• WoodDerivedProducts
(MDF, Chipboard, Plywood,
Blockboard, Hardboard. etc)
• Aluminium
• MildSteel
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a Multipurpose
Jigsaw and must only be used as such. It
must not be modied in any way, or used to
power any other equipment or drive any other
accessories other than those mentioned in this
Instruction Manual.
To Next Page
Loading...
Need help?
General
