IONPURE
®
LX CEDI Modules
Page 4 IP-MAN-LX-1220-EN.pdf
6.4. Clean-In-Place (CIP) System Construction 24
6.5. Chemical Cleaning and Sanitization Precautions 26
6.6. Typical Procedure for Cleaning or Sanitization 26
6.6.1 Preparation 26
6.6.2 Cleaning 26
6.6.3 Return to service 27
6.7. Cleaning Solution Recipes 28
6.8. Recommended Grades for Cleaning Chemicals 30
6.9. Hot Water Sanitization (HWS) 31
6.8.1 HWS Phase 1 – Hot Water Introduction 31
6.8.2 HWS Phase 2 – Temperature Hold 31
6.8.3 HWS Phase 3 – Return to service 32
7. TROUBLESHOOTING 33
8. SHUTDOWN AND STORAGE 40
8.1. System Shutdown 40
8.2. Startup After Shutdown 40
8.3. Rebuild or Repair 40
8.4. Disposal 40
APPENDIX A: LX MODULE SPECIFICATIONS 41
APPENDIX B1: LX LAYOUT & ELEVATION DRAWING (EU, X, Z) 43
APPENDIX B2: LX LAYOUT & ELEVATION DRAWING (HI) 44
APPENDIX B3: LX JUNCTION BOX DRAWING (ALL MODELS & SIZES) 45
APPENDIX C: LX ADAPTER LIST 46
APPENDIX D: LX MATERIALS OF CONSTRUCTION & APPROVALS 47
To Next Page
Loading...
Need help?
General
