Taillight Assembly and Charger Port Replacement
Taillight Assembly Replacement – To
replace the taillight assembly, the seat,
storage box, and main body shroud must be
removed. Once removed, take out the 5
securing screws that connect the taillight
assembly to the main body shroud.
Charger Port Replacement – To replace the
charger port, the seat and storage box must
be removed. Once removed, take the two
screws that secure the charger part to the
main body shroud out. Disconnect the
original charger port from the wire harness
and install the new charger port.
Front Turn Signal Fob and
Ignition Replacement
Front Turn Signal Fob Replacement – To replace the front turn
signal fob, the front sliding plate and front body shroud must
first be removed. Once removed, replace the original front turn
signal fob with the replacement main body shroud using the
three mounting screws.
To Next Page
