EWM Phoenix 355 Progress puls MM TDM

Need help?

Do you have a question about the EWM Phoenix 355 Progress puls MM TDM and is the answer not in the manual?

Summary

Safety Instructions

Notes on Operating Instructions Usage

Explains safety note keywords (DANGER, WARNING, CAUTION, NOTE) and their meanings.

General Safety Precautions

Covers general safety precautions including electric shock, radiation, explosion risks, and environmental hazards.

Intended Use

Design and Function

General Safety and Setup Procedures

Covers general safety, installation, cooling, and workpiece lead connection for proper operation.

Mains Connection Requirements

Details the requirements and precautions for connecting the welding machine to the main power supply.

Interfaces and Remote Controls

Maintenance, Care, and Disposal

Maintenance Work Intervals and Tasks

Outlines daily, monthly, and annual maintenance tasks, including visual inspections and functional tests.

Qualified Personnel for Maintenance

Rectifying Faults

Checklist for Fault Rectification

Provides a checklist for troubleshooting common faults and causes related to coolant, wire feed, and functional errors.

Power Source Error Messages and Remedies

Lists error codes displayed by the power source, their possible causes, and recommended remedies.

Technical Data

Phoenix 355 TDM Specifications

Lists the technical specifications for the Phoenix 355 TDM welding machine, including current, voltage, and duty cycle.

Phoenix 405 Specifications

Lists the technical specifications for the Phoenix 405 welding machine, including current, voltage, and duty cycle.

Phoenix 505 Specifications

Lists the technical specifications for the Phoenix 505 welding machine, including current, voltage, and duty cycle.