Need help?Do you have a question about the EWM Picotig 200 TG and is the answer not in the manual?
Guide to understanding safety symbols, warnings, and general instructions.
Defines all symbols used in the manual for clarity and safety.
Covers crucial safety topics like electric shock, radiation, and explosion hazards.
Safety precautions for moving and setting up the welding machine.
Describes the machine's use for TIG and MMA welding processes.
Lists related documents, warranty, and conformity declarations.
Identifies front panel components, controls, and connections.
Identifies rear panel components, connections, and ports.
Explains the functions of the display, buttons, and rotary dials.
Covers general aspects of the machine's design and associated safety.
Details requirements for optimal machine cooling and ventilation.
Outlines correct procedures for connecting workpiece leads and mains power.
Covers torch connection, shielding gas, task selection, and arc ignition.
Details electrode connection, task selection, hotstart, and arcforce.
Explains the usage of remote controls and power-saving mode.
Describes how to access and modify machine settings via the configuration menu.
Outlines basic maintenance requirements for reliable operation.
Details daily, monthly, and annual inspections and functional tests.
Provides guidance on environmentally sound disposal of the machine.
Presents a checklist for identifying and resolving operational faults.
Explains error messages and their corresponding remedies.
Covers resetting parameters and checking software versions.
Lists detailed technical specifications, ratings, and operating parameters.
Lists optional accessories for transport, operation, and general use.
Provides contact information for EWM offices worldwide.
General| Input Voltage | 230 V |
|---|---|
| Input Current | 16 A |
| Welding current range TIG DC | 5 - 200 A |
| Protection class | IP23 |
| Insulation class | F |
| Welding process | MMA |
| Welding current range MMA | 10 A |
To Next Page