• RoHS Dir
ecve 2011/65/EU
• EMC Direcve 2014/30/EU
• RE Direcve 2014/53/EU (1)
(1): When applicable, the product conforms to the corresponding RE Direcve arcles: RF spectrum eciency: Art
3(2); EMC: Art. 3 (1)(b); Safety: Art. (3)(1)(a)
3.4.2. Applicable Safety Standards
The Ewon
®
Flexy 205 and its extension cards are in conformity with the required safety standards.
These safety documentaon can be downloaded on the Cercaons secon of our Ewon Support website.
3.4.3. FCC Compliance
The Ewon
®
Flexy 205 and its extension cards comply with Part 15 of the FCC Rules. Operang is subject to the
following two condions:
• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesired operaon.
3.4.4. Certifications
The Ewon
®
Flexy 205 has been cered by authorized bodies.
These cercates can be downloaded as PDF les on the Cercaons secon of our Ewon Support website.
3.5. Reference Standards for Type Tests
The Ewon Flexy 205 and their extension cards have been fully validated on temperature, vibraon and shock
against the requirements of the following standards:
Operang & Storage Temperature:
Test nature Reference Standard
Cold test IEC 60068-2-1
Dry heat test IEC 60068-2-2
Temperature change test IEC 60068-2-14
Cyclic damp heat test IEC 60068-2-30
Vibraon & Shock Tests:
Test nature Reference Standard
Vibraon t
est (sinusoidal) IEC 60068-2-6
Vibraon test (broad-band random) IEC 60068-2-64
Shock test IEC60068-2-27
3.5.1. Mounting R
ecommendations
The product is intended to be mounted vercally, label on the right side.
The normal mounng posion of the Ewon
®
Flexy 205 is wall mounted on a horizontal
Omega type DIN-rail (EN 50022).
Reference Standards for Type Tests Ewon
®
Flexy 205
IG-0028-00 1.7 en-US Page 6 of 37
To Next Page
Loading...
Need help?
General
