4.2 Lifting GhosT-OLED Full Kit and Full Kit PCAP out of the wooden box
Required Tools: (Cordless) screw driver
➢ Unscrew the back cover and carefully take it away:
➢ Grab with one hand under the panel unit directly behind the glass, and with the
other hand grab the handle. Then carefully lift the GhosT-OLED a bit until you can
change the position of the hand on the panel unit:
Note: Make sure that the GhosT-OLED cannot tilt during changing the grab of the hand on
the panel unit
To Next Page
Loading...