What does “Er1” mean on eXact iDip® Measuring Instruments LCD?
If you see “Er1” on the eXact iDip® LCD, it means no result was sent to the eXact iDip® from the app. To fix this, close and restart the app, then reconnect to the eXact iDip®.
Why does my eXact Measuring Instruments iDip show 'LO' on the LCD while zeroing?
If your eXact iDip displays 'LO' on the LCD during zeroing, this could be due to several reasons. First, try replacing the batteries, as a low battery can cause this issue. Other potential causes include a dirty cell, which you may need to clean, or a cloudy sample, which you can address by diluting the sample or using a sieve. In rare cases, it could indicate a bad LED, in which case you should contact ITS.
How to fix a dim screen on eXact Measuring Instruments iDip?
A dim screen on your eXact iDip measuring instrument is likely due to a low battery. Replace the batteries to resolve this issue.
What to do if eXact Measuring Instruments iDip LCD shows 'Er2'?
If the LCD of your eXact iDip shows 'Er2', it indicates there's no connection to the app or the connection was lost. Try connecting or reconnecting to the iDip to resolve this.
What does 'HI' mean on eXact Measuring Instruments iDip LCD while reading?
If your eXact iDip displays 'HI' on the LCD while reading, it means the result is above the detection level. To verify, rerun the test.
What does 'LO' mean on eXact Measuring Instruments iDip LCD while reading?
If your eXact iDip shows 'LO' on the LCD during a reading, it indicates that the result is below the detection level. You should rerun the test to confirm the result.
What does “Er2” mean on my eXact iDip® Measuring Instruments?
The “Er2” error message on the eXact iDip® LCD indicates there is no connection to the app or that the connection to the app was lost. To fix this: * Connect the eXact iDip®. * Reconnect to the eXact iDip® if the connection was lost.
What does “LO” mean on eXact iDip® Measuring Instruments LCD?
If the eXact iDip® LCD shows “LO” while reading, it indicates that the result is below the detection level. Rerun the test to verify the result.
What does “HI” mean on eXact iDip® Measuring Instruments LCD?
If the eXact iDip® LCD displays “HI” while reading, it means the result is above the detection level. Rerun the test to verify the result.
How to fix dim screen on eXact iDip® Measuring Instruments?
A dim screen on your eXact iDip® typically indicates a low battery. Replacing the batteries should resolve this issue.
General| Geometry | 45°/0° |
|---|---|
| Measurement Spot | 4mm |
| Spectral Range | 400-700nm |
| Inter-Instrument Agreement | ΔE*ab ≤ 0.4 |
| Repeatability | ΔE*ab ≤ 0.03 |
| Wireless Communication | Bluetooth |
| Resolution | 0.01 |
| Display | Color LCD touchscreen |
| Power Supply | Lithium Ion |
| Operating Temperature | 10°C |
| Storage Temperature | -20°C to 50°C |
To Next Page
