18
©2017, Industrial Test Systems, Inc. Printed in USA
FILL CELL
Rinse the cell 3 times with the water sample to
be tested and FILL to the top to begin test.
Use the included cleaning brush to clean the cell after
each test to achieve the most accurate results.
TIP
SELECT TEST
Tap
'Select Test'
at the top (e.g. Alkalinity, Total).
The eXact iDip
®
and app will both display the
test being run. If using the eXact iDip
®
570, all
available tests will begin with 570 (see below).
Alkalinity, Total AL
Bluetooth Test
Alkalinity, Total AL Selected
ZERO METER
Press and the iDip
®
display reads 0
PPM
indicating the meter is ready for testing.
In bright light and liquid method situations use cell cover
for zeroing and reading.
TIP
SELECT, FILL, DIP, READ
To Next Page
Loading...
Need help?
General
